Heavy-duty racks are the most common form of racking in various storage racking systems. They have the advantages of heavy load-bearing and wide application range. However, in the process of use, accidents due to improper operation are also common. What should be paid attention to in the process of racking? Remind you to pay attention to the following points when operating:
1. The use of heavy-duty shelves should be prevented from being top-heavy: the principle of putting light goods at the top and heavy goods at the bottom should be implemented.
2. To prevent overloading: the stacking weight of each layer shall not exceed the maximum carrying capacity of the shelf.
3. Anti-collision: During the operation of the forklift, it should be handled as gently as possible to prevent impact on the shelf.
4. When there is goods above the shelf, the operator should not directly enter the bottom of the shelf.
5. To prevent the use of non-standard floor boards (cardboards), trays, etc. on the shelves, the Chuanzi bottom is the most suitable.
When the shelf height exceeds eight meters, corresponding loading and unloading machinery is required. Therefore, the total required channel area is larger, and the storage density is smaller than other systems. Heavy-duty storage racks can realize quick access to various pallets, and the unit cargo can be up to 2000KG, which can adapt to various types of pallets and racks. The height of the beam can be adjusted according to the requirements of the cargo size. The flow of goods is large, according to the convenience and speed. Heavy duty racks have the lowest cost and can be installed and folded quickly.
