Cantilever shelves are generally made of two materials
1. Made of square tubes: According to the corresponding cantilever layer load requirements, the cantilever racks first select the square tubes that meet the layer load requirements, cut them into the required size, weld the anti-skid guard plate at one end, and weld the U-shaped column connector at the other end. made.
2. Made of c-shaped steel: According to the corresponding cantilever layer load requirements, the cantilevered shelf first selects the specifications of the c-shaped steel, and then welds two pieces of c-shaped steel. Connect the u-column connector.
The column pieces of the cantilever rack are connected by connecting rods, and the connecting rods are generally made of rectangular tubes. In order to increase safety and stability, add a flat iron back to the connecting rod and use a special puller to fix the column tightly.
All cantilever rack components are semi-finished products after production, and will be sprayed in the final process. Before spraying, the shot blasting machine is used to remove oil and rust, and then spray. Packaged and shipped after completion.
1. Cantilevered shelves are divided into single-arm and double-arm, which can efficiently store wood, pipes, long objects and other similar products. The cantilever rack can be composed of a single column unit with a cantilever through a horizontal pull rod, a diagonal pull rod, etc. to continuously form multiple unit systems.
2. Cantilever racking is an effective storage system in terms of quality, safety and management. The column piece is composed of a column and a base, and the column is made of two specially designed C-shaped steel butt-welded. This structure makes full use of the anti-load capacity of the material, and has the characteristics of large bearing capacity and low cost.
3. The column is prefabricated with double rows of holes. The pitch of the holes is 100mm. The cantilever is connected to the column through a plate pin, which can be adjusted up and down with a pitch of 100mm.
