Pass-through shelves are also known as corridor-type shelves or drive-in shelves. The through-type rack can be used for forklifts (or unmanned trucks with forks) to drive into the aisle to store and store goods. It is suitable for the storage of small varieties and large batches of goods. In addition to the storage space near the aisle, the forklift needs to enter the rack to access the goods, and it is usually recommended that the depth of the single-sided pick-up should not exceed 7 positions. In order to improve the running speed of the forklift, guide rails can be selected according to actual needs. ) are widely used in wholesale, cold storage and food and tobacco industries.
Through-type racks can be configured with guide rails according to actual needs.
The storage capacity of the through-type rack is almost double that of the usual h-beam rack in the same space, because the aisle between each row of racks is eliminated, and the racks are merged together, so that the goods on the same layer and in the same column are connected to each other. , to maximize the utilization of storage capacity.
Pass-through shelves are widely used for the storage of large quantities and small varieties of goods, such goods are uniformly packaged and have a single product, such as: food, tobacco, cold storage and other warehouses.
Column, diagonal brace, cross brace, back pull, top pull, top beam, spacer brace, double corbel, hanging plate, single corbel, foot protector, guide rail, etc.
Shelf Features:
1. On the support rails, the trays are stored in depth direction, one after the other, which makes high-density storage possible.
2. The goods are stored and withdrawn from the same side of the shelf. First deposit and then withdraw, and then deposit and first withdraw. The counterweight and forward forklift can easily drive into the middle of the shelf to access the goods without occupying multiple channels.
3. This kind of shelf is suitable for storing large quantities and few varieties of goods. The corbels and corbel shelves of the through racks (drive-in racks) all adopt the overall stamping/rolling technology, which has strong bearing capacity and beautiful appearance. .
4 through-type racks are fully plugged and assembled, and the columns are fabricated structures. The total depth of the shelves in the wall area is generally best controlled within 5 pallet depths, and the total depth of the shelves that can enter and exit from both sides in the middle area is generally best controlled. Within 10 pallets deep to improve the efficiency and reliability of forklift access.
The stability of the through-type racking system is relatively weak among all types of racks. Therefore, the rack should not be too high, generally within 10m. In addition, a tensioning device needs to be added to the system. The racks of this type of system are densely arranged and have a high space utilization rate. It is suitable for storing small-variety and large-volume goods of the same type.
